Home › Speed Bumps, Curbs, and Asphalt Accessories
Precision Asphalt Akron provides speed bump installation in Akron, OH along with asphalt curbs, wheel stops, and other parking lot accessories. We help slow traffic, protect landscaping, and guide drivers using correctly sized and placed features. Schedule a walkthrough to plan safety and traffic calming improvements.
Precision Asphalt Akron provides professional speed bump installation throughout Akron, OH, Ohio and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (330) 969-8126 or request your free quote.
Speed bump installation and asphalt accessories tailored to Akron traffic
When you call Precision Asphalt Akron for speed bump installation, curbs, or other asphalt accessories, we start by walking your property with you. Whether it is a busy apartment complex off Tallmadge Avenue, a church parking lot in Firestone Park, or a private drive in Ellet, we look at how people actually drive and where conflicts happen. We note sight lines, crosswalks, lighting, drainage patterns, snow plow routes, and existing asphalt thickness so the solution fits your site instead of using a one size fits all layout.
For speed bumps, we talk through your goals first: are you trying to slow cars to 5–10 mph at a pedestrian crossing, or just calm traffic in a long straight section to around 15 mph? That choice drives the profile (height and length), spacing, and whether a speed hump or speed table is better. We also review emergency access, since Akron fire trucks and ambulances still need to get through quickly on certain routes. If needed, we coordinate with property managers or HOA boards to get clear rules and expectations in writing before we start.
Once the plan is clear, we measure and mark proposed locations with paint so you can see exactly where each bump, curb, or bollard will go. In busy lots, we often schedule installation early morning or during off hours to avoid disrupting your business. Our crew blocks off work zones with cones and signage and sets up detours inside the lot when required so customers and tenants are not surprised or unsafe during the work.
How we install speed bumps that hold up to Ohio weather
Durability in Akron means planning for freeze thaw cycles, salt, and plow blades. Precision Asphalt Akron typically installs speed bumps as either hot mix asphalt features paved directly into the lot or as preformed rubber or plastic units mechanically anchored to the pavement. We help you choose based on traffic volume, existing pavement condition, and how flexible you want the layout to be in the future.
For asphalt speed bumps, we start by cleaning and sometimes milling the surface where the bump will go so new material keys tightly into the existing pavement. We check slope so water does not pond on the uphill side, since standing water and winter refreeze will break down even good asphalt. Our crew places hot mix asphalt with a compact profile, usually 2 to 3 inches high and 12 to 24 inches wide, then compacts it with vibratory rollers and plate compactors. We taper the ends to reduce plow impact and to meet any ADA considerations near walkways.
Once the asphalt cools, we apply high contrast striping. Most clients choose bright yellow or white reflective markings so drivers see the bump in rain, dusk, and snow glare. In shaded areas, like lots near tall trees in Goodyear Heights, we may recommend thermoplastic markings that stay brighter longer. We typically advise a short cure period before full traffic, usually a few hours for light cars and up to a day for heavy trucks, and we leave you with simple maintenance tips so you know what to expect over the first season.
For rubber or plastic speed bumps, we drill through the existing pavement and set concrete or asphalt anchors. This option is helpful where you may want to move or remove the bumps later, for example in seasonal campground or school applications. We still address drainage and visibility, and we torque anchors to the correct levels so they stay tight in Akron winters instead of loosening after a few plow runs.
Curbs, wheel stops, and site accessories that work with your pavement
Speed bump installation often goes hand in hand with curbs, wheel stops, and other asphalt accessories that protect your investment and organize traffic. Precision Asphalt Akron installs extruded concrete curbs, asphalt curbs, and precast parking blocks throughout the Akron area, and we match the style to the pavement structure and your maintenance plan.
Where lots already have a good asphalt base, asphalt curbs formed at the edge of the pavement can be a cost effective option. We heat and place asphalt along the edge, shape it to the desired profile with a curb machine or by hand, and compact thoroughly so it locks in. For higher impact locations, such as at dumpster pads or loading docks, we often recommend concrete curbs with rebar dowels drilled into the existing pavement. They stand up better to repeated contact from delivery trucks and snow equipment.
Wheel stops (parking blocks) are common in Akron retail and multifamily lots because they protect sidewalks, fences, landscaping, and building fronts from vehicle overrun. We install precast concrete or recycled rubber blocks using rebar pins or mechanical anchors set through the block into the pavement or base. Proper placement matters: too close to a sidewalk creates a trip hazard, too far allows bumpers to hit walls. We use consistent offsets that work for typical passenger vehicles while taking into account any larger pickups or delivery vans that frequent your site.
We also integrate accessories like bollards around gas meters or overhead door tracks, drain collars to protect catch basins from plow damage, and signage posts set in concrete footings. All these small features work together with your speed bumps and curbs to guide drivers and protect people and structures.
What affects cost and timeline for speed bumps, curbs, and accessories
Pricing for speed bump installation and related accessories in Akron is mainly driven by three things: scope, site conditions, and traffic management needs. Precision Asphalt Akron is upfront about these factors before we schedule your job, so you are not surprised by change orders.
Scope includes the number of speed bumps or humps, the choice between asphalt and prefabricated units, the length and height, how many linear feet of curb or how many wheel stops you need, and whether you want premium markings like reflective tape or thermoplastic. A lot with two simple bumps and a few parking blocks is a different project from a full reconfiguration of a busy medical office lot with dozens of locations and bollards.
Site conditions really matter in our area. Older lots with multiple overlays, cracked bases, or drainage issues sometimes need small localized repairs before new features can be added. For example, if a frost heave near a planned bump creates a dip where water will collect, we may recommend patching or leveling that area first. Access for equipment also plays a role. Tight downtown Akron alleys and enclosed courtyards can limit what machinery we can bring in, which may increase labor time.
Traffic management is often overlooked when people compare quotes. If your lot must stay partially open, we design the work in phases with cones, caution tape, and temporary signage, and sometimes we provide flaggers for short periods. Night or weekend work can add to cost but may be the best fit for medical offices or retail centers that cannot afford daytime disruption. When we bid a project, we include realistic expectations for how long each phase will take and how long areas must stay closed so you can plan tenant notices or customer alerts.
What Akron property owners should know before hiring a contractor
Before you hire anyone for speed bump installation or similar work, there are a few Akron specific considerations that can save you headaches. First, check whether your property falls under any city, township, or HOA restrictions on traffic calming devices. Some public roads have strict rules about bump height and spacing, and even on private lots you may have zoning or insurance requirements. Precision Asphalt Akron can help you read through these and coordinate with your property manager or legal team as needed.
Second, ask how the contractor accounts for winter maintenance. In Northeast Ohio, plows, salt, and freeze thaw cycles are hard on poorly designed speed bumps and curbs. We talk with your snow contractor when possible and design profiles and marking layouts that are easy to see in snow conditions and kinder to plow blades. We also set curbs, blocks, and bollards with proper depth and reinforcement so they do not shift after a few seasons of frost.
Third, request details on materials and installation methods, not just a lump sum price. For example, what asphalt mix is being used, and is it suitable for commercial traffic and heavy trucks that might access nearby Akron industrial areas? How thick will any patching or new curbs be? What anchors are specified for rubber bumps or wheel stops? The answers tell you whether the work will actually last.
Finally, make sure the contractor will stand behind the layout, not just the workmanship. At Precision Asphalt Akron, we will explain why we recommend certain bump locations, curb lines, and accessories and how they are expected to affect driver behavior. If a layout proves too aggressive or too mild, we can adjust future phases or, in some cases, modify existing installations. That kind of long term thinking keeps your lot safer and more functional instead of just adding random obstacles to the pavement.
